This page explains how to configure your H.323 or SIP gateway or ATA device to send calls to SIP Boutique.

• Free billing system

  

• Getting started

  Signup for your new VoIP service online.

  Account sign-up >>

• Control panels

  You have two control panels, both accessible using the same account number and password.

  Your account >>
  Your billing system >>

• Sipura SPA-2000 / Linksys PAP2 (Configuration Wizard)
• Linksys SPA8000 (Configuration Wizard)
• Grandstream BudgeTone-100
• Welltech WellGate 3504a, 3502 (SIP)
• Welltech WellGate 3504a, 3502 (H.323)
• ZyXEL Prestige 2000W
• Cisco ATA 186 (SIP)
• Cisco ATA 186 (H.323)
• Quintum Tenor gateways

1. Configure your equipment to register at our SIP server at sip.sipboutique.com
2. Configure your equipment to send calls to our SIP server at sip.sipboutique.com
3. Set the authentication ID to your SIP Boutique account number.
4. Set the password to your SIP Boutique password.
5. Set a unique line ID for each line (or booth).

• Configure your equipment to send all telephone calls to a gatekeeper.   The gatekeeper IP address is 95.154.218.4.   If possible, we recommend that you use the DNS name gk1.sipboutique.com.
• Configure your equipment to register at the gatekeeper using an E164 alias (telephone number) or an H.323 alias.  The alias address should be 1822 followed by your SIP Boutique account number followed by your SIP Boutique password.  For example, if your account number is 200100 and your password is 900100, set the E164 alias to be 1822200100900100.
• Set a unique line ID for each line (or booth).    (This is only important if you use the free Bill My Calls call shop billing system).

If your public IP address is shared, this type of registration will not be appropriate, because all devices at your public IP address to use your service.  We will need to perform further authentication using your line IDs.  Please contact support@sipboutique.com for further assistance.